
Equipment for Lithium Batteries
Cell Making
Pouch Li-Ion Cell Pilot Assembly Line
This line is designed for start-up and pilot production of pouch cells, with high format flexibility: the line is suitable to produce small-size cells up to EV and Energy Storage applications.
It is equipped with an efficient and user-friendly tool for developing new cell sizes and for testing different chemistries, with high-quality standards.
Cylindrical Li-Ion Cell Pilot Assembly Line
Solith’s Pilot Assembly Line for Cylindrical Li-Ion Cells is designed for both research and factory labs, being suitable for the production of a wide range of cells, including 18650, 26650, and 21700 formats. It covers the entire assembly process, from electrode cutting to cell filling and sealing.
The complete line is composed of the following machines: Strip Preparation Bench, Tab Welding Bench, Cell Winding Machine, Deep Can Welding Machine, Can Necking & Crimping Machine, Top Cap Welding Machine, and Electrolyte Filling Machine.
EPM – Electrode Punching Machine
This machine punches the electrodes from a coated roll or pre-cut strip in an automatic process which reduces the workforce needed for its operation. The tolerance on the cutting tool (in the micron range) allows a precise cut without burrs and with very precise dimensions.
The machine is a part of the Pouch Li-Ion Cells Pilot Assembly Line.
TWTM – Tab Welding & Trimming Machine
SSSM – Single Sheet Stacking Machine
The Single Sheet Stacking Machine is designed for the stacking of anode, cathode and separator in the Pouch Li-Ion cell assembly process using pre-cut separator foils. The operation of the machine is completely automatic to ensure precision and repeatability of the process.
The machine is a part of the Pouch Li-Ion Cells Pilot Assembly Line.
ZFS – Z-Fold Stacker
The Z-Fold Stacker is designed for the stacking of anode, cathode and separator in the Pouch Li-Ion cell assembly process. The operation is automatic so that precision and repeatability are much higher than in the manual stacking process.
The machine is available in different versions and it is a part of the Pouch Li-Ion Cells Pilot Assembly Line.
BFM – Blister Forming Machine
PSM – Pouch Sealing Machine
EFM – Electrolyte Filling Machine
The Electrolyte Filling Machine is designed for production of Pouch Li-Ion cells and it performs electrolyte dispensing under vacuum and pouch sealing.
The equipment can be provided as stand alone unit for dry room or for glove box installation.
The machine is a part of the Pouch Li-Ion Cells Pilot Assembly Line.
DSU – Degassing & Sealing Unit
The Degassing & Sealing Unit is designed for the production of Pouch Li-ion cells. The sealing operation is performed under vacuum to remove gases developed by lithium cell reactions during the formation cycle.
Degassing and pouch trimming operations are made in two separate modules for better maintenance and process control.
The equipment can be provided with wheels for easier positioning and relocation inside a laboratory or dry room.
The machine is part of the Pouch Li-Ion Cells Pilot Assembly Line.